Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: HBRC HBX68


Drone News

Recommended Posts

Here is new 2S 68mm tinywhoop FPV racer from HBRC, i.e. the HBX68: https://www.banggood.com/HBX68-68mm-1-2S-RC-FPV-Racing-Drone-PNP-BNF-F3-10A-BLHeli_S-800TVL-0802-16000KV-Motor-p-1416705.html
It’s still based on a old F3 + OSD board…. but now there are some builtin 10A ESC !!! so really no problem to handle 2S voltage (and maybe more …). The machine includes a AIO combo FPV camera with 48CH and with three outputs power: 25mW/100mW and 200mW. No information if there is a IRC Tramp or SmartAudio support… probably not… Motors are these new 0802/16000Kv model… In a first glance, this new HBX68 is not advanced as the Eachine trashcan (probably no smartaudio, no F4 FC) but the main pro point of this machine is its weight about 27g (with the receiver included) so clearly 5-6g less than the Trashcan. In 2S configuration, this machine should be around 42-43g… not so bad for indoors applications.

HBX-68-1

HBX-68-2

HBX-68-3

HBX-68-4

HBX-68-5

Specification:
Item name: HB(X)68 68mm 1-2S FPV racing drone
Wheelbase: 68mm
Weight: about 25.6g (without battery)
Recommed flight weight: <42g (with battery)
Flight time: 3-7mins(2S 250mAh/350mAh)
Flight controller: 1-2S F3, built-in OSD
ESC: 1-2S 10A BLHeli_S
Motor: 1-2S S0802 16000KV
Propeller: 35mm 4-blades
VTX+camera: 25/100/200mW 800TVL 150° 48CH
Receiver: without receiver/ DSMX pro/ FrSky D8/ FS-RX2A/ SFHSS AC900 receiver(option)

F3 OSD flight controller:
Processor: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: SPI sensor MPU-6000
Firmware: Betaflight_3.x.x_OMNIBUS
Power supply: 1-2S
Built-in 5V/0.8A BEC
Built-in BF OSD
Built-in LC filter
Support programmable LED
Supports BLheli suite ESC programme
With buzzer port

SBUS or DSM receiver input, please configurate RX3 as input interface.
DSM receiver powered from 3.3V
SBUS and PPM from 5V

10A BLHeli_s ESC:
Firmware: BLHeli_S 16.6/16.7
Continuous current: 10A
Burst current: 12A (5s)
Power supply: 1-2S lipo(3.0-8.7V)
Support Dshot150/300/600, PWM, Oneshot125, Multishot

0802 16000KV motor:
Item name: S0802
KV: 16000KV
Stator diameter: 8mm
Stator height: 2mm
Shaft diameter: 1mm
Working voltage: 1-2S(3.0-8.7V)
Weight: 1.9g
Mounting hole: 6.6mm/1.4mm

VTX+camera:
Output power: 25mW/100mW/200mW
Lens: HD800TVL/FOV: 150°
Channel: 48CH
Antenna: copper tube

Including battery:
Capacity: 250/ 300mAh
Voltage: 3.8-4.35V(HV) (2x battery)
Continuous Discharge Rate: 30C/60C
Connector: PH2.0-2P
Weight: about 6.9-7.5g

Recommended battery:
2x 1S 250mah 30C 3.8V HV (series connection)
2x 1S 300mah 30C 3.8V HV (series connection)
1x 2S 260mah 35C 7.6V HV
1x 2S 350mah 35C 7.6V HV

Package included:
PNP version:
1x HB(X)68 68mm frame kit
1x S0802 16000KV motor
1x F3 OSD+10A BLHeli_S fytower
1x 48CH 800TVL AIO camera VTX
2x 1S 250/300mAh 30C HV battery
2x pairs 35mm 4-blade orange propeller
1x 1S HV charger

BNF version:
1x HB(X)68 68mm frame kit
1x S0802 16000KV motor
1x F3 OSD+10A BLHeli_S fytower
1x 48CH 800TVL AIO camera VTX
2x 1S 250/300mAh 30C HV battery
1x DSMX pro/ FrSky D8/ FS-RX2A/ SFHSSAC900 receiver(option)
2x pairs 35mm 4-blade orange propeller
1x 1S HV charger

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...