Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: RealAcc Real 5


Recommended Posts

A new racer from RealAcc in 215mm PNP format with the Real 5 model: https://www.banggood.com/Realacc-Real5-215MM-FPV-Racing-Drone-PNP-Omnibus-F4-30A-Blheli_S-ESC-25200600mW-VTX-800TVL-Camera-p-1279364.html
Massively carbon based with 4mm arms, the Real 5 integrates a F4 w/OSD board, a 800TVL CCD camera, strong 30A ESC BLheli_S/Dshot 600 but limited to 4S setup. For the 5.8G VTX part, it’s based on a 48CH module with switchable output power: 25mW, 200mW and 600mW. No information if it’s support IRC Tramp protocol to control all VTX settings via the OSD. The circularized antenna is connected via a coaxial cable ending with a uFL connector. In case of crash on the antenna section, due to the location of the SMA connector in the rear section, it should resist well. The main central tower is tall enough for a future micro split mini combo… No really bad design failures can be guessed from this Real 5 machine. A lot of spare are provided in the bundle. Of course, wait & see….

Real_Acc_Real5_1

Real_Acc_Real5_10

Real_Acc_Real5_2

Real_Acc_Real5_3

Real_Acc_Real5_4

Real_Acc_Real5_5

Real_Acc_Real5_6

Real_Acc_Real5_7

Real_Acc_Real5_8

Real_Acc_Real5_9

Specification:
Brand name: Realacc
Item name: Real5 215MM FPV Racing Drone
Motor: 2206 2600KV

Frame Kit:
Wheelbase: 215mm
Arm plate: 4mm
Other board: 2mm

Omnibus F4 Flight Controller:
STM32F405
LC filter: YES
Replaceable Sensor: MPU-6000 with SPI Data Bus or Next-Generation Sensor ICM-20608G
Support D-Shot ESC
Lipo 2-4S input,
Built-in 1.5A
BEC
DFU button
Black box, maximum 16M data record
SBUS / PPM / Spektrum satellite
Support WS2812 light bar
Buzzer port
PCB 36 * 36mm
Mounting hole 30.5 * 30.5
Support RaceFlight BetaFlight

ESC:
4 in 1 integrated ESC
Current: 30A * 4
Maximum current: 35A * 4 up to 6S
Working voltage: 2-4S Lipo
Size: 36 * 36mm
Mounting hole: 30.5 * 30.5mm
Firmware: BLHeli_S
Support: Support Dshot150 / 300/600, Oneshot125 / 42, Multishot, PWM
Main IC: EMF8BB21F16G SILABS, 8bit C8051, run 50MHz

VTX:
Transmit power 3 block switch: 25mW / 200mW / 600mW
Channel: 48CH
Video format: NTSC / PAL;
Power consumption: 7V ~ 24V, + 12V / 260mA @ 600mW;
Small size: 36mm × 36mm × 5mm
Light weight: ≤ 6g (without antenna);
Connection is more stable: mmcx turn sam connector

Camera:
800TVL CCD 2.8mm lens
Size: 25mm * 25mm, Weight: 9.5g
Full format video format: NTSC / PAL; (default PAL)
Working voltage: DC5-12V
Operating current: 70mA (low power consumption)

Package Included:
1 X 215mm Frame Kit
1 x Omnibus F4 flight controller
1 x 4 in 1 30A ESC
4 x 2206 2600KV motor
1 x 25mW / 200mW / 600mW VTX
1 X 800TVL Camera

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...