Jump to content

  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Eachine QX90C Pro, the new brushed 0820 FPV reference ?

Recommended Posts

Eachine just announced a new brushed 120mm FPV quadcopter with the QX90C pro: https://www.banggood.com/Eachine-QX90C-Pro-with-F3-Betaflight-OSD-Buzzer-Telemetry-Micro-FPV-Racing-Drone-Quadcopter-BNF-p-1267721.html

Even if brushless machines are now became the standard, here we have a 1S solution equiped of 8.5mmx20mm coreless dark edition boosted motors. The F3 board welcomes obviously a OSD chip and even a small buzzer is preinstalled. For the FPV rig, a classic 600TVL 25mW 48CH AIO solution is integrated. Notice also the lens can be tilted up to +15 degrees. The machine is powered via a 600mAh LiPo with microLOSI connector. Three choices of receiver are proposed: FrSky D8 (with RSSI display for OSD), FlySky AFHDS-2A and Spektrum DSM2/X. The total weight with the battery is about 50g, so lighter than other competitor machines and with on steroid motors, the performance should be not bad at all. You can also select three types of bundle: from “basic” to the “fly more” combo with 5 set of spare LiPo and props and a charger. Wait & See….









Brand Name: Eachine
Item NO.: QX90C Pro
Weight: 50.5g (With battery)
Flight controller: Eachine AIOF3_Brushed built-in OSD
Motor: Coreless 8520 Black Edition CW/CCW
Propeller: Lady bird 55mm CW/CCW 2-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW 48CH NTSC Video transmitter
Battery: 3.7V 600mah Lipo battery
OSD: Betaflight OSD
Firmware of Flight controller: Betaflight 3.2.2 (Target:Omnibus)
Flight time: 5 minutes (Battery voltage at 2.8v)

– More powerful Coreless motor
– Jaw-dropping flight performance
– Airmode/Angle/Acro mode support
– Adjustable Angle of Camera (0°~15°)
– Built-in Betaflight OSD
– Radio Stick to control PID Tunes
– Buzzer Ready
– Telemetry RSSI Output ready(Frsky version)
– V-bat Detector

Receiver Option:
– Frsky D8 mode SBUS Output 8ch With RSSI output (OSD display or X9D telemetry)
– Flysky compatible 8ch IBUS receiver(AFHDS 2A Mode)
– DSM2/DSMX compatible Receiver

1.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter.
2.Flysky Receiver Support FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F, Turnigy Evolution Transmitter.
3.DSM2/DSMX Receiver Support Spectrum/JR(DSM2/DSMX protocol) DEVO10/DEVO 7E(with deviation firmware).

Version Option:
– Basic Combo: with One battery, one USB charger, spare propellers one set.
– Standard Combo: with Three batteries, one USB charger, spare propellers one set.
– Fly more Combo: with Five batteries, a Charsoon BC-1S05 Charger, a spare body cover shell and camera cover, spare propellers 5 sets.

Package Included:


Basic Combo:
1 x QX90C Pro Drone
1 x 3.7V 600mah Lipo Battery
1 x USB Charger
4 x Spare Propeller
1 x Buzzer
1 x Paddle Propeller


Standard Combo:
1 x QX90C Pro Drone
3 x 3.7V 600mah Lipo Battery
1 x USB Charger
4 x Spare Propeller
1 x Buzzer
1 x Paddle Propeller


Fly more Combo:
1 x QX90C Pro Drone
5 x 3.7V 600mah Lipo Battery
1 x Charsoon BC-1S05 Charger
20 x Spare Propeller
1 x Spare Body Cover Shell
1 x Spare Camera Cover
1 x Buzzer
1 x Paddle Propeller

Cet article NEWS: Eachine QX90C Pro, the new brushed 0820 FPV reference ? est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...