Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Happymodel Snapper7


Drone News
 Share

Recommended Posts

It was not a real surprise but now with new micro F3 3-in-1 flight controller including, OSD, especially with the last announced CrazyBee F3 model, it’s not a surprize to see new BNF model emerging. Here is the Happymodel TinyWhoop variant (I guess another subdivision of WLtoys/XK): https://www.banggood.com/Happymodel-Snapper7-75mm-Crazybee-F3-OSD-5A-BL_S-ESC-1S-Brushless-Whoop-FPV-Racing-Drone-BNF-p-1266612.html

Like the Boldclash B06, it’s a 75mm model (so 10mm larger than the genuine TW chassi) with 5A ESC BLheli_S/Dshot 600. Motors are 0703 but running @19000Kv… so among the fastest in 1S configuration. Of course the main interest is the presence of a BetaOSD compatible chip to overlay important informations in your FPV signal. Two BNF versions are proposed: one with a FrSky D8 mode … but also written switchable in D16 mode … If true, can be great. I really Hope RSSI is exported at least on the last channel. The second receiver is compatible with FlySky AFHDS-2A protocol. The main chassis is carbon based and standalone without the battery, the weight turns around 28g and close to 40h with a 450mAh LiHV (3.8V) battery. It’s a serious competitor of the Boldclash B06… at least for the first model introduced … but for the Boldclash, an upgraded version with more or less the same caracteristics will available late march. I will receive for the first editio the new FC (w/OSD) and the 20000Kv motors. The Happymodel, two bundle are proposed. One with three batteries. For the 5.8G part … a classic 48CH 25mW 700TVL CMOS AIO solution. The battery has microLOSI connectors…An interesting paper on the paper. Wait & See ….

Happymodel_Snapper7-1

Happymodel_Snapper7-2

Happymodel_Snapper7-3

Happymodel_Snapper7-4

Happymodel_Snapper7-5

Specification:
Brand Name: Happymodel
Model: Snapper7
Item Name: 75mm Wheelbase 1S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional)
The difference of them are the package lipo battery and charger
Receiver: Compatible Frsky D8 Receiver
Compatible Flysky AFHDS Receiver ( Optional)

Size: 98.5mm*98.5mm*36mm
Weight: 28g (without battery)

-Crazybee F3 Flight Controller
Item Name: Crazybee F3 FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 (SPI connection)
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver Or Flysky Receiver
Built-in Betaflight OSD(SPI Controll)
Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Firmware: Betaflight_3.3.0_Crazybee
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Heading LED Ready
Onboard 5A 4 In 1 ESC
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Motor connector: JST PH1.25 3pin
Signal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM

Onboard Frsky Receiver Version ( Optional)
SPI BUS receiver
Frsky D8/D16 switchable
Compatible both of Non EU and EU LBT transmitter
Channels: 8CH
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground) : 300m

Onboard Flysky Receiver Version ( Optional)
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch (AFHDS) or 14ch (AFHDS-2A)
No ground interference (Transmitter and receiver 1 m from the ground): 300m
Failsafe support

SE0703 19000KV Motor
Model: SE0703
KV: 19000KV
Configu-ration: 9N12P
Stator Diamter: 7mm
Stator Length: 3mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10*14.5
Weight: 2.5g
No.of Cells: 1S Lipo

-Propeller
40mm 3-blade Propeller ( 4 CW + 4 CCW)

-5.8G VTX AIO Camera
5.8G 48CH 25mW VTX
Output Power: 25mW
Frequency: 48CH
With Raceband: 5474-5945 MHZ
Input Voltage: 3.3V-5.5V
Current Consumption: 300mA (type)

-700TVL Camera
Camera Resolution: 700TVL
Field of View: 120°
Video Format: NTSC
Antenna: RG178 antenna
Size: 13.9×12.0mm( LxW)
Weight: 3g

-3.8V 450mAh Lipo Battery
Capacity: 450mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Instantaneous Discharge Rate: 60C
Size: 60x18x7mm
Weight: 13.6g
Connector: PH2.0

Features:
– Betaflight support, multi flight mode: ACRO/AIR/ANGLE
– Powerful Brushless motor and Smooth ESC
– CNC aluminum alloy propeller guard
– Betaflight OSD support, easy to get RSSI, Voltage and other info from your goggles
– Adjust the settings and the PID of the flight controller via OSD
Frsky version support both EU LBT and NON-EU Frsky transmitter
– Full telemetry function ready
– Head lights ready
– Camera angle adjustable
– Real Bind and Fly version

Package Inlcuded:
Basic Version
1x Snapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
1x 3.8v 450mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Snapper7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
3x 3.8v 450mah 30C/60C Lipo Battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Screwdrive

Cet article NEWS: Happymodel Snapper7 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...