Jump to content

  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Racerstar Crazybee F3

Drone News

Recommended Posts

Want to build you own brushless tinywhoop easily without spending hours in microsoldering jobs ?. Here is maybe the solution with the Crazybee F3 4-in-1 board: https://www.banggood.com/Racerstar-Crazybee-F3-Flight-Controller-4-IN-1-5A-1S-Blheli_S-ESC-Compatible-Frsky-D8-Receiver-p-1262972.html

In the same board fully integraded in 29mmx29mm size, we have a F3 MCU + a builtin OSD, a 5A ESC BLheli_S/Dshot 600, a FrSky D8 with telemetry & RSSI and a BEC up to 0.8A enough to power an external small 25mW AIO module. The board weights only 3.5g. Brushless motors can be directly connected via 3 positions microJST connector (seems to be 1.25mm model). The board can only works in 1S for LiPo or LiHv batteries. Sounds to be a pretty interesting model. Ideal motors are 0603 or 0703 models. For example the HB68 or HB64 quadcopters comes with such kind of motors with plug.





Crazybee F3 flight controller is a Ultimate version for 1S Whoop racing drone, it’s the world first Tiny whoop size brushless flight controller with Receiver/4in1 ESC/OSD/Current Meter all in one design, include all your needs .

Firmware: Betaflight_3.3.0_Crazybee
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry D8
Built-in Betaflight OSD(SPI Controll)
Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
Board size: 29 * 29MM
Board weight: 3.5 g

ESC parameters:
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Signal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM

Receiver parameters:
SPI BUS receiver
Compatible Frsky D8
Channels: 8ch
Failsafe support
No ground interference ( Transmitting and receiving 1 m from the ground): 300m

Package Included:
1 x Crazybee flight controller ESC receiver

Cet article NEWS: Racerstar Crazybee F3 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...