Jump to content

  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Eachine AURORA A100, 1S brushless FPV racer with 0705/10000Kv

Drone News

Recommended Posts

A new very interesting Eachine brushless racer is announced with the Aurora A100: https://www.banggood.com/AuroraRC-A100-1S-Micro-Brushless-FPV-Racing-Drone-w-F3-OSD-BLHeli_S-5A-48CH-25mw-VTX-600TVL-PNP-BNF-p-1225243.html

Here it’s an ultralight weight 1S model but equiped of 0705 motors instead of weaker 0703 models usually seen in all brushless 1S FPV racers. These more powerfull motors should boost considerably performances without too much extra weight. Other element are now classic: a F3 with a builtin betaflight OSD, a 4-in-1 5A BLheli_S/Dshot600 ESC board. For the FPV part a basic 600TVL CMOS 25mW/48CH AIO camera module. Four type of receivers are proposed: a FlySky AFHDS, a FlySky AFHDS-2A, A FrSky (D8?/D16?) or a spektrum DSM2/X. There is also a PNP to install your own prefered receiver. A buzzer is also here. All the structure is 1.5mm carbon based. The machine standalone is around 30g. With the 600mAh/25C LiPo, the total weight will turn around 50g.













AuroraRC A100 Micro FPV Racing Drone
Brand name: AuroraRC
Item name: A100 Micro FPV Racing Drone
Wheel base: 100mm
Normal X
Bottom board: 1.5mm
Top board: 1.5mm
Standoff: 19mm
Size: 80mm * 80mm * 21mm
Weight: about 30g (without battery)
Flight time: 2.5-4 minutes
Battery: 1S LiPo (3.7-4.2V)
Package size: 18*12*6cm
Package weight: 80g

F3 Flight controller
Firmware: betaflight_3.2.0_OMNIBUS
CPU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000 SPI
Power supply: 1S battery input(DC 3.6-4.2V)
BEC: built in 5V/0.5A boosted circuit
Receiver: support PPM, SBUS, IBUS, Spektrum DSM2/DSMX, 1024/2048.
Built-in OSD port
Support BLheli suite programming
Built-in voltage test and alarm
Size: 25*30mm
Mounting hole: 16*16mm (f2.5mm)
Weight: 3.1g

4 In 1 BLHeli_S 5A Brushless ESC
Power supply: 1S
Continuous current: 5A
Peak current: 6A (3S)
Support BLHeliSuite programming
Factory firmware: O_L_5_REV16_6.HEX
Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM

Brushless motor
Sunnysky 0705 10000KV (with bearing)

55mm 2-blade 1.0mm mounting hole

AIO VTX & Camera
VTX: 48CH 25mw
Camera: 600TVL 120° wide angle

PNP version: without receiver
BNF version: Compatible DSMX / FRSKY / AFHDS / AFHDS 2A (optional)

600mah 1S 3.7V 25C LiPo battery

Package included:
1 x A100 frame kit
1 x flight controller integrated ESC
4 x 0705 10000KV brushless motor
8 x 55mm 2-blade propeller
1 x vm2751 VTX AIO camera
1 x receiver (BNF version only)
1 x 600mah 3.7V 25C battery

Cet article NEWS: Eachine AURORA A100, 1S brushless FPV racer with 0705/10000Kv est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...