Jump to content

  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Flight Controller F7 Omnibus V2

Drone News

Recommended Posts

F4 boards are only and spread since one year only and now F7 board are already in the corner: https://www.banggood.com/Omnibus-F7-V2-Flight-Controller-STM32-F745-MCU-2-4S-Built-in-Betaflight-OSD-Dual-Gyro-30_5x30_5mm-p-1215667.html

Not only CPU clock are one more time increased versus the F4 but now a dual 6-axis IMU is present to improve even more the stabilization’s performances. More, the gyro-accelero chips are installed on a dampening gel and should absorb any vibrations transmitted by motors. The F7 board is large (36mmx36mm) and weigths 10g so clearly for >130mm machines. With this board, no problem to push the machine up to 32Khz.







OMNIBUS F7 V2 now with inertial damping gyro jacket. The case mass absorbs & resists by inertial damping the vibrations coming from the motors, props, frame, ect… – The added crash protection. The case is mounted by Gell tape and not hard mounted to the airframe in the same way a normal gyro is isolated. In our testing this does work better then soft mounting the whole Flight Controller.

Item name: Omnibus F7 V2 flight controller
MCU: STM32 F745 (Spi connected to Gyro)
MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
IMC268 (the 6 axis SPI Gyrometer + Accelerometer)
D-shot Support
Dual Gyro
Size: 36x36mm
Mount holes: 30.5×30.5mm
Weight: 10g
Default firmware: betaflight_3.2.0_OMNIBUSF7V2
SBUS, IBUS, DSM2, DSMX Receiver configuration: UART2

F7 MCU – faster than the current F3 and F4 processors.
Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz.
Built in betaflight OSD
36x36mm, mount holes 30.5×30.5mm.
SD card reader for recording black box data (SD card not included).
Supports 2-4S natively
5V/3A regulator
Port for easy connection to 30A 4-IN-1 ESC (SH1.0 8P)

Package included:
1 x flight controller
1 x SH1.0 6P cable
1 x SH1.0 8P cable

Cet article NEWS: Flight Controller F7 Omnibus V2 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...