Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Teeny F4 OSD mini-tower in 20mmx20mm format


Drone News
 Share

Recommended Posts

Here is the new Teeny FC in 16mmx16mm holes version (20mmx20mm): https://www.banggood.com/Teeny1S-F4-Flight-Controller-Built-in-Betaflight-OSD-Teeny1S-4-In-1-6A-BLHeli_S-ESC-p-1176420.html

At least two goods news: i) now they integrate a F4 CPU core with SPI connexion with the MPU (faster loop and gyro freqs can be selected) and ii) a betaflight OSD chip is also included. For the ESC part, a 4-in-1 6A BLheli_S/Dshot 600 board with a peak up to 7A… It’s announced to support only 1S … 🙁 what’s a pity… The BEC only deliver 0.5A…Hope it will be enought for both the receiver and a small 25mW AIO module. With such new board you can expect a lot new super tiny 1S brushless racers with OSD probably with 07xx motors. The total weight should be around 4.5-5g with wires. Pretty impressive.

null

null

null

null

null

Flight controller specification:
Item name: Teeny1S F4 flight controller Built-in Betaflight OSD
Size: 20*20mm
Mounting hole: 16*16mm
Diameter: 2mm
Weight: 2.2g
Processor: STM32F405RGT6
Sensor: MPU-6000 ( connected by SPI)
Firmware version: betaflight_3.1.7_OMNIBUSF4SD
Built-in SBEC: 5V/0.5A
Receiver: PPM, Spektrum 1024/2048, SBUS, IBUS, XBUS, SumD SumH RX etc.
Power supply: 1S lipo battery ( 3.3V-4.35V)
Suitable for 60mm-80mm mini brushless FPV Quadcopter frame

null

null

null

null

null

ESC specification:
Item name: Teeny1s 4 In 1 6A BLHeli_S ESC
Size: 23x28mm (includes solder pad)
Mounting holes: 16x16mm, f2mm
Weight: 2g
Input voltage: 1S lipo or 1S HV-LIPO
Con. Current: 6A
Peak Current: 7A (5S)
Firmware: BLHeli_S O_L_5_REV16_5.HEX
Processor: SILABS EFM8BB10F8G
BEC: NO
Driver: 3 in 1 MOS
Supports Dshot150 Dshot300 Dshot600 Oneshot125 Multishot PWM

Features:
-Support programmable LED Sprit (turn off transponder before using)
-Support BLheli/BLHELI_S suite Pass-through ready
-Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
-Default Dshot600
-Built-in voltage detection, alarm
-Built-in Betaflight-OSD
-Buzzer solder pin
-LED_STRIP connector

null

Package included:
1* Teeny1S F4 flight control board
1* Teeny1S BS06D 6A 4in1 ESC
1* Connection wire
8*M2*5+5 Nylon column
8*M2 Nuts
8*M2 Screw

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...