Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Grasshopper-94


Recommended Posts

And the valse of microbrushless FPV racer continues. Here a 94mm machine wiht the Grasshopper-94: http://www.gearbest.com/brushless-fpv-racer/pp_663417.htmlFor the electronic, everything ultraclassic now: F3+OSD flight controller, 1104/7800kv (so a bit fast for 3S maybe), 4-in-1 BLheli_S/Dshot600 ESC board and a classic 600TVL 48CH 25mW AIO FPV camera. The machine comes with a 2S LiPo (only). The design reminds a bit the Wasp design with these lateral carbon structures. Comes without receiver. No information of the thickness of the lower main carbon stucture but from photo I don’t think it’s larger than 2mm.

null

null

null

null

null

Description:
Grasshopper – 94 94mm mini FPV racing drone is a brilliant racer which has an amazing competence in bringing you the unprecedented flight. With an 80C high discharge rate LiPo, you are able to enjoy piloting the drone at a high speed with maximum immersion. More importantly, you are allowed to adjust the parameters via BetaFlight ground station or with the transmitter, know the real-time RSSI whenever you want.

Main Features:
– Efficient flight because of the 94mm small wheelbase, aerodynamic canopy, and 1104 7800KV brushless motors
– Minicube F3 flight controller supports CleanFlight and BetaFlight; self-balancing, semi-self-balancing and manual mode
– OSD and ESC settings can be adjusted remotely by the BetaFlight ground station and the transmitter respectively
– BLHeli – S ESC uses DShot600 ( default ) to ensure the anti-interference and fast responses for freewheeling
– 600TVL CMOS camera works with the VM275 5.8G 48CH 25mW VTX, offering you the real-time FPV within 150m

Specifications:
Wheelbase: 94mm
Weight: 68g ( not including battery )
Brushless motor: 1104 7800KV
Brushless ESC: 4-in-1 BLHeli – S 10A
Propeller: 50mm five-blade
Camera: 600TVL HD CMOS
Video transmitter: VM275 5.8G 48CH 25mW
Flight controller: Minicube F3 6DOF with OSD
Buzzer size: 10 x 20mm ( with integrated LED )
Battery: 7.4V 550mAh 80C LiPo ( included )
Flight time: 3 – 5 minutes

Minicube F3 6DOF Flight Controller
Size: 27 x 27 x 5mm
Mounting hole spacing: 20mm
Processor: STM32F303 MCU
IMU: MPU6000 SPI
OSD display: battery voltage, RSSI, flight mode, flight duration, aircraft name etc.
Firmware: OMNIBUSF3 BetaFlight 3.1

Minicube 4-in-1 BLHeli – S 10A ESC
Size: 27 x 27 x 5mm
Mounting hole spacing: 20mm
Processor: BB2 48MHz chip
Firmware version: BLHeli – S 16.5
Continuous current: 4 x 10A
Peak current: 4 x 15A ( up to 10 seconds )
Power supply: 2 – 3S LiPo
BEC output: 5V 1A
Programmable: yes
BetaFlight passthrough ready
DShot600 ( default ) ready

Cet article NEWS: Grasshopper-94 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...