Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: Eachine TeenyCube, a 8.8g 20mmx20mm 3-in-1 cube


Recommended Posts

Everybody knows probably the Eachine Minicube installed in a lot of last Eachine Racers (AUrora 68, 90, 100 Lizard 95 for example). Here is another more compact version 20mmx20mm only !!: https://www.banggood.com/15x15mm-Eachine-TeenyCube-Flytower-Frsky-XSR-E-Receiver-F3-Flight-Controller-6A-2-in-1-ESC-p-1156647.html

Here, the Eachine TeenyCube is clearly copying the amazing work of the TeenyFish compagny, at least for the FC. We have a 3 layers electronic cube with:
i) at lower position a 4-in-1 6A BLheli_S/Dshot ready ESC board + 5V@1A PDV with a peak up to 10A and compatible with 2S setup
ii) in the middle, a F3 omnibus board but not builtin betaflight (the next TeenyFish FC will integrate one)
iii) and a FrSky D16 with telemetry and diversity antenna

A 8.8g solution !!!! amazing. You can use this cube with some 0703, 0704, 0705 brushless motors… everything should be under 15g.

null

null

null

null

null

null

null

Specification:
Brand Name: Eachine
Item Name:Flight Controller & ESC & Receiver Flytower
Mounting Hole: 15x15mm
Size: 20x20mm
Weight: 8.8g

Eachine & Frsky XSR-E Telemetry Receiver:
Introduction: Original Frsky Product, which has same function as XSR Receiver. Only the cable is diffirent

– Channel: XSR-16CH(1-16CH from SBUS channel, 1-8ch from CPPM Channel)
– Dimension: 20×20 mm
– Mounting Hole: 15×15 mm
– Weight: 1.8g
– Operating Voltage Range: 4.0~10V
– Firmware Upgradeable
– Compatibility: FrSky X-series Module & Radio in D16 Mode
– Smart port ready
– S-BUS/CPPM output (BLUE LED stay lit indicates XSR-M in S-BUS mode, otherwise in CPPM mode) Features
– How to switch S-BUS and CPPM signal: Long press the F/S button on the receiver for 3 seconds, the GREEN LED will flash thrice, indicating the switch is completed

6A BLHeli_S Dshot 2 In 1 ESC: ( More Details)
Model:BS06D
Con. Current: 6A
Peak Current(10s): 10A
Input Voltage: 2S Lipo
BEC: No
Programming : YES
Cleanflihg/Betaflight pass-through ready
Firmware: Blheli_S 16.5
Net Weight: only 1.7g (Not include wire)
Size:20*20mm
Mount hole: 15mm*15mm M2
6DOF F3 Flight Control Integrated with PDB BEC
Model: F3T
Mount Hole: 15x15mm M2 Screw
Size: 20x20mm
Weight: 1.6g
Working Voltage: 2-4S Lipo Direct power
Firmware version: Betaflight 3.1
Processor: STM32 F303 MCU
SPI Sensor: MPU6000
BEC: 5V@1A
SBUS/PPM/DSM2/DSMX input (Pin headers)
ESC Dshot protocol compatible (Need not modify)
5V@1A BEC
3.3V output for spectrum Satellite Receiver
Firmware target: Omnibus
Build in PDB

-ESC Dshot protocol compatible (Don’t need modify)
-with 3.3V output for spectrum Satellite Receiver
-Build in PDB
-LED Strip solder pad ready
-Buzzer solder pad ready

null

Package Included:
1x Frsky XSR-E Receiver
2x 6A 2 In 1 ESC
1x F3 Flight Controller

Cet article NEWS: Eachine TeenyCube, a 8.8g 20mmx20mm 3-in-1 cube est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...