NEWS: F3 EVO brushed for Tinywhoop/E010

Drone News · January 7, 2017

After some official inductrix product, we can now find a F3 board adapted for your favorite TinyWhoop/Eachine E010 to enjoy full acro flight mode: http://www.banggood.com/F3_EVO_Brushed-ACRO-Flight-Control-Board-For-Blade-Inductrix-Tiny-Whoop-Eachine-E010-E010C-E010S-p-1119214.html. More by default, a FrSky D8 receiver in included. FlySky and DSM2 receiver versions are also announced. A 2.7g board. It shouldn’t impact too much on your original flight time. We can dream soon to have a version including a BetaOSD chip

Specifications:
Brand name: Inductrix
Item name: F3_EVO_Brushed ACRO Flight Control Board
Size: 27.5 x 27.5mm
Weight: 2.7 grams
Work voltage: 3.7v-5v / 1S Lipo battery input
Firmware Version: Cleanflight 1.13.0
Receiver option: 8CH Frsky protocol SBUS output D8 Mode
6CH Flysky protocol PPM output
6CH DSM2 protocol PPM output
Features:
1. Integrated FRSKY compatible 8CH receiver, serial output. Support FRSKY communication protocol, 8 channels
2. Built-in DCDC boost circuit can be powered by other devices IIC and UART interface
3. Drive motor frequency: 2K (this frequency can be set by the user, the maximum frequency can be set to 32K)
4. Through the Clean Flight tuning software tune Player’s own parameters
5. High discharge battery connector wire for more power and performance.
6. Can fly your Inductrix style quad in full rate mode (or even air mode!), fully execute flips/ rolls, and shoot the smallest of gaps with precision! Tuned to give you that locked in feeling you get with standard race quads.

Compatible:
1.Frsky Receiver Support FRSKY X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter.
2.Flysky Receiver Support FS-I6, Echine I6, TH9X, DEVO 7E with A7105 Module series Transmitter.
3.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).

Usage:
Blade Inductrix Tiny Whoop Eachine E010 E010C E010S