NEW REPORT | Drones in Surveying – a Value Chain Analysis for the Construction Industry

Drone News · November 23, 2016

Are you considering using drones for surveying in your construction business, but feel like you need more information to help you evaluate the pros and cons? Check out this recent post from Drone Industry Insights (DroneII.com) on UAV value chain analysis and the implications for your business to see whether drones may be a good fit for your surveying needs.

Alternately, if you’re considering using drones for work in a public organization, such as a fire or police department, you might find our recent post on how to navigate the U.S. COA Process helpful.

The Drone Industry Insights post begins here:

Small UAVs, as compared to manned aircraft, convince through their ability to fly very slowly and at lower altitudes. This way, more detailed and valuable information can be obtained. UAVs close the gap (between ground- and aircraft/satellite-based methods) through their ability to fly at low altitudes (up to 100m), which cannot be covered by the alternatives mentioned previously.

“It should be mentioned that compared to other options, UAVs are rather limited in terms of the amount of payload they can carry. This is why light, non-professional consumer cameras are generally used, although they cannot match the quality of stable metric cameras. Yet, even with those comparatively inexpensive cameras, it is possible to attain results that are more than sufficient for the needs of the construction industry.”

– Prof. Thomas P. Kersten, HafenCity University Hamburg, Geomatics Lab

Now, what does this mean for you business?

The possibility to shorten the surveying process through the support of UAV solutions contains the potential to enormously reduce the time and monetary investment – for every project, for every surveying company and in every country. Surveyors can not only increase their productivity by being able to carry out more projects in the same amount of time, but they can also work with a more qualitative dataset, which makes it possible to conduct better, more thorough planning.

To make the right decisions it is important to define the results you need. Therefore you can use the inverse decision-making process below. After the initial question if you want to hire a professional drone operator or starting a drone operation yourself it necessary to have a close look at the local regulations and environmental conditions. Once the mission and all aspects of operation are clear, you can start to configure the unmanned aerial system (UAS). With all information describing your plans (incl. fixed and operational costs) you can now chose again whether to start your own drone operation or to buy in the service.

Image source

Where exactly can I save money and how much?

Looking at the entire value chain it becomes clear that many resource- and time-intensive activities can be replaced. Looking at repetitive activities (e.g. checking construction progress of the same location), the savings through UAV operation can be even greater.

The report Value Chain Analysis for UAV-based Surveying represents the essence of what you need to know if you consider using drone technology in surveying. It offers a detailed outline of technological, legal and operational aspects of UAV application in comparison to conventional surveying methods. The question when UAV technology in the construction industry pays off economically is discussed in detail.

In addition to the Drone Business Development Guide 2016 which outlines the basics of a UAV market entry, this report is mission specific and provides the most comprehensive analysis about commercial UAVs in action so far. This report was created with the support of construction surveying and UAV experts.

Curious about the mechanics that make drones work? Check out our infographic ‘How Drones Work‘ for in-depth insight into the inner workings of UAVs.